To make a DIY bean bag toss set, gather the following materials: plywood (2 pieces, 2x4 feet), 2x4 lumber (for frame), screws, wood glue, sandpaper, paint or wood stain, and fabric for bean bags.
1. **Cut the Plywood**: Cut two pieces of plywood to 2x4 feet each. These will be the boards for the game.
2. **Create the Frame**: Cut 2x4 lumber to create a rectangular frame for each board. Attach the frame to the underside of each plywood piece using wood glue and screws for stability.
3. **Cut the Hole**: Measure and mark a circle 6 inches in diameter, centered 9 inches from the top of each board. Use a jigsaw to cut out the circle.
4. **Sand the Boards**: Sand all surfaces, especially around the hole, to ensure smoothness and prevent splinters.
5. **Paint or Stain**: Apply paint or wood stain to the boards and frame. Allow to dry completely. Optionally, add designs or decals for a personalized touch.
6. **Attach Legs**: Cut two 2x4 pieces for each board to serve as legs. Attach them to the top of the frame with hinges, allowing them to fold for storage. Ensure the legs are cut at an angle to make the board stand at a slight incline.
7. **Make Bean Bags**: Cut fabric into 7x7 inch squares. Sew three sides, fill with beans or plastic pellets, and sew the final side. Make eight bags, four of each color.
8. **Assemble and Play**: Set up the boards 27 feet apart. Each player or team takes turns tossing bean bags, aiming to get them through the hole for points.