Showing 0 products

Frequently Asked Questions

How is heater output matched to a cabin?

By volume, then adjusted for the fabric.

Glass and uninsulated surfaces behave as extra volume.

A large glass front raises the requirement noticeably.

Exposed masonry does the same.

Undersizing shows as slow recovery between groups.

Give the supplier the construction, not just the size.

Why does stone capacity matter?

The stones are the thermal store.

They hold the energy that makes steam.

Small stone volume cannot sustain repeated pouring.

The room recovers quickly but disappoints in use.

Commercial heaters carry generous stone volume.

Compare stone capacity as well as rating.

Do sauna stones need replacing?

Yes, they are a consumable.

Heat cycling fractures them over time.

Broken stone restricts airflow through the heater.

That shortens element life measurably.

Restacking is scheduled maintenance, not repair.

Commercial rooms restack far more often.

Integrated or separate controls?

Commercial rooms almost always use separate.

Staff can operate the sauna from outside it.

Scheduling and lockout become possible.

Integrated controls suit small private cabins.

They require entering the hot room to adjust.

Decide it from who operates the room.

Does sensor placement matter?

It is prescribed, not discretionary.

Manufacturers specify a position and height.

A misplaced sensor gives a room that reads correct.

It will still feel wrong to bathers.

Airflow around the sensor changes the reading.

Follow the instruction rather than site convenience.

When is a wood-fired heater the answer?

Where electrical supply is inadequate.

Remote and off-grid sites are the common case.

It brings a flue and clearance requirements.

Fuel storage has to be planned for.

Some operators choose it for the experience.

Local rules on solid fuel apply.

What limits electric heater life?

Elements and airflow through the stones.

Restricted airflow overheats the elements.

Broken stone is the usual cause.

Continuous commercial duty shortens life further.

Ask whether elements are replaceable individually.

That decides the cost of a mid-life repair.