A poly cord strapping kit typically includes the following components: 1. **Poly Cord Strapping Roll**: This is the main component, made from polyester or polypropylene fibers woven together to create a strong, flexible strap. It is used for securing and bundling items. 2. **Tensioner Tool**: This tool is used to apply tension to the poly cord strapping, ensuring it is tight and secure around the items being bundled. 3. **Sealer Tool**: Also known as a crimper, this tool is used to seal the strapping by compressing a seal or buckle, ensuring the strapping remains tight. 4. **Seals or Buckles**: These are used to secure the ends of the strapping after it has been tensioned. They can be made of metal or plastic and are essential for maintaining the integrity of the strapping. 5. **Cutter**: A cutting tool is included to trim the strapping to the desired length after it has been applied and secured. 6. **Dispenser**: Some kits include a dispenser to hold and dispense the strapping roll, making it easier to handle and apply. 7. **Instructions**: A manual or guide is often included to provide instructions on how to properly use the tools and apply the strapping. These components work together to provide a complete solution for securing and bundling items with poly cord strapping.

To use a poly cord strapping kit, follow these steps: 1. **Preparation**: Gather all necessary materials, including the poly cord strapping, buckles, tensioner, and cutter. Ensure the items to be strapped are properly aligned and stable. 2. **Measure and Cut**: Determine the length of the poly cord needed by wrapping it around the items to be secured, leaving extra length for tying. Cut the cord using the cutter provided in the kit. 3. **Position the Strap**: Place the cut poly cord around the items, ensuring it is positioned evenly and securely. 4. **Thread the Buckle**: Take one end of the poly cord and thread it through the open end of the buckle. Pull it through and loop it back over the crossbar of the buckle. 5. **Secure the Buckle**: Thread the other end of the poly cord through the opposite side of the buckle, pulling it tight to secure the initial loop. 6. **Tension the Strap**: Use the tensioner tool to tighten the poly cord. Insert the loose end of the cord into the tensioner, and crank the handle to apply tension. Ensure the strap is tight enough to secure the load without damaging it. 7. **Lock the Strap**: Once the desired tension is achieved, lock the buckle by folding the loose end of the cord back over the crossbar and threading it through the buckle again, if necessary. 8. **Trim Excess Cord**: Use the cutter to trim any excess poly cord, ensuring a neat and tidy finish. 9. **Final Check**: Inspect the strapping to ensure it is secure and the items are stable. Adjust if necessary. By following these steps, you can effectively use a poly cord strapping kit to secure items for storage or transport.

Poly cord strapping offers several benefits over steel strapping: 1. **Safety**: Poly cord strapping is safer to handle than steel strapping. It reduces the risk of cuts and injuries during application and removal, as it does not have sharp edges. 2. **Flexibility and Elasticity**: Poly cord strapping is more flexible and elastic, allowing it to absorb impacts and maintain tension better than steel. This makes it ideal for loads that may settle or expand during transit. 3. **Weight**: Poly cord strapping is significantly lighter than steel, making it easier to handle and reducing shipping costs. 4. **Corrosion Resistance**: Unlike steel, poly cord strapping does not rust or corrode, making it suitable for outdoor storage and shipping in humid or corrosive environments. 5. **Cost-Effectiveness**: Poly cord strapping is generally more cost-effective than steel strapping, both in terms of material costs and the reduced need for protective gear and tools. 6. **Ease of Use**: It is easier to apply and remove, often requiring less specialized equipment. This can lead to faster packaging times and increased efficiency. 7. **Non-Marring**: Poly cord strapping is less likely to damage or scratch the surfaces of the products it secures, preserving the integrity and appearance of the goods. 8. **Recyclability**: Many types of poly cord strapping are recyclable, offering an environmentally friendly alternative to steel. 9. **Versatility**: It is suitable for a wide range of applications, from light to heavy-duty, and can be used with various types of buckles and tensioning tools. 10. **Shock Absorption**: Its ability to absorb shocks makes it ideal for securing loads that are subject to movement or vibration during transport.

Poly cord strapping, also known as polyester cord strapping, is a versatile and durable option for securing loads. It is made from polyester fibers woven together, providing a high level of strength and flexibility. Compared to other types of strapping, such as steel, polypropylene, and polyester plastic strapping, poly cord strapping offers several advantages and some limitations. 1. **Strength**: Poly cord strapping is strong and can handle heavy loads, but it is generally not as strong as steel strapping. Steel is the strongest option, ideal for extremely heavy or sharp-edged loads. However, poly cord strapping is often preferred for its ability to absorb impacts and maintain tension over time, which steel cannot do as effectively. 2. **Flexibility and Safety**: Poly cord strapping is more flexible than steel, making it easier to handle and apply. It is also safer to use, as it does not have sharp edges that can cause injuries. This flexibility allows it to conform to irregularly shaped loads better than steel. 3. **Weather Resistance**: Poly cord strapping is resistant to moisture, UV rays, and most chemicals, making it suitable for outdoor use and long-term storage. This is an advantage over polypropylene strapping, which can degrade under UV exposure. 4. **Cost**: While more expensive than polypropylene strapping, poly cord strapping is generally more cost-effective than steel, especially when considering the reduced risk of injury and damage to goods. 5. **Applications**: It is ideal for securing loads that require some give, such as lumber, bricks, and other building materials. It is also used in industries like agriculture and shipping. In summary, poly cord strapping offers a balance of strength, flexibility, and safety, making it suitable for a wide range of applications, though it may not be the best choice for the heaviest or most demanding loads where steel would be preferred.

Yes, poly cord strapping can be used outdoors. Poly cord strapping, made from polyester fibers, is known for its durability, flexibility, and resistance to environmental factors, making it suitable for outdoor applications. It is resistant to moisture, UV rays, and temperature variations, which are common challenges in outdoor environments. This type of strapping does not rust or corrode, unlike metal strapping, and maintains its strength and integrity even when exposed to rain, sunlight, and fluctuating temperatures. Poly cord strapping is often used in industries such as agriculture, construction, and shipping, where outdoor storage and transportation are common. Its ability to absorb shock and maintain tension over time makes it ideal for securing loads that may be subject to movement or shifting during transit. Additionally, poly cord strapping is lightweight and easy to handle, which facilitates its use in various outdoor settings. However, while poly cord strapping is suitable for outdoor use, it is important to consider the specific conditions and duration of exposure. Prolonged exposure to extreme weather conditions may eventually degrade the material, so regular inspection and maintenance are recommended to ensure its continued effectiveness. In cases where the strapping will be exposed to harsh conditions for extended periods, it may be beneficial to use additional protective measures or consider alternative strapping materials designed for extreme environments. Overall, poly cord strapping is a versatile and reliable option for outdoor use, offering a balance of strength, flexibility, and resistance to environmental factors.

Tensioning and sealing poly cord strapping require specific tools to ensure secure and effective application. The primary tools needed are: 1. **Tensioner**: This tool is used to apply the necessary tension to the poly cord strapping around the package or pallet. It ensures that the strapping is tight enough to hold the items securely in place. There are manual, battery-operated, and pneumatic tensioners available, with manual tensioners being the most common for poly cord strapping. 2. **Sealer**: After tensioning, a sealer is used to crimp a seal onto the strapping, securing it in place. Sealers are designed to work with specific types of seals, such as metal buckles or wire buckles, which are commonly used with poly cord strapping. The sealer ensures that the strapping remains tight and secure during transit. 3. **Seals/Buckles**: These are the components that hold the strapping in place once it has been tensioned. For poly cord strapping, wire buckles are often used because they provide a strong grip and can be easily applied with a sealer. 4. **Strapping Cutter**: A cutter is used to trim the excess strapping after it has been tensioned and sealed. This ensures a neat finish and prevents any loose ends that could cause safety hazards or interfere with handling. 5. **Dispenser**: While not essential, a strapping dispenser can be very helpful. It holds the roll of poly cord strapping and allows for easy unwinding and application, reducing tangles and improving efficiency. These tools work together to ensure that poly cord strapping is applied correctly, providing the necessary support and security for shipping and storage.

To maintain and store poly cord strapping kits effectively, follow these steps: 1. **Storage Environment**: Keep the strapping kits in a cool, dry place away from direct sunlight and moisture to prevent degradation. Ensure the storage area is clean and free from dust and debris. 2. **Temperature Control**: Maintain a stable temperature, ideally between 50°F and 77°F (10°C and 25°C), to prevent the poly cord from becoming brittle or losing elasticity. 3. **Organized Storage**: Use shelves or racks to store the kits neatly. Label each kit for easy identification and access. Ensure that the kits are not stacked too high to avoid crushing or tangling. 4. **Protection from Chemicals**: Store away from chemicals, solvents, or any corrosive materials that could damage the poly cord. 5. **Regular Inspection**: Periodically inspect the strapping kits for signs of wear, damage, or contamination. Check for fraying, cuts, or weakened areas in the poly cord. 6. **Proper Handling**: Train personnel on the correct handling techniques to avoid unnecessary stress or damage to the strapping. Use appropriate tools and equipment for cutting and tensioning. 7. **Inventory Management**: Keep track of inventory levels and expiration dates. Rotate stock to use older kits first, ensuring that none remain unused for extended periods. 8. **Maintenance of Tools**: Regularly clean and maintain the tools and accessories included in the kits, such as tensioners and sealers, to ensure they function correctly and do not damage the strapping. 9. **Safety Measures**: Implement safety protocols for handling and using the strapping kits to prevent accidents or injuries. By following these guidelines, you can ensure the longevity and effectiveness of your poly cord strapping kits.