Showing 0 products
Frequently Asked Questions
What does the housing contribute to filtration?
The seal, which is what makes the rating real.
Air takes the easiest path available.
A poorly sealed filter is simply bypassed.
The filter still looks correct and clean.
Nothing indicates the loss.
An expensive filter becomes an ordinary one.
What separates the three types?
How the filter is changed, not capacity.
Side access withdraws it sideways.
Contained change never exposes the operator.
Inline units sit inside a duct run.
Exposure risk decides between them.
Capacity is a separate calculation.
When is contained change actually necessary?
When the dust must never reach a person.
Hazardous, biological or radioactive contamination.
The filter is bagged before it leaves the housing.
It costs considerably more and takes longer.
It is not a general upgrade.
Specify it against a defined hazard.
What layout constraint does side access create?
Clearance beside the housing.
Filters withdraw sideways and need the room.
A housing against a wall cannot be serviced.
That is found at the first filter change.
Mark the withdrawal zone at design.
Other plant gets installed into it otherwise.
How is the seal verified?
By gasket condition and clamping, checked.
Ask how the filter clamps against the frame.
Some housings offer scan testing ports.
Critical applications require in-place testing.
Record the result at commissioning.
Re-check after every filter change.
Does the housing need to match the filter?
Closely, in dimension and depth.
Filter sizes vary between manufacturers.
A near fit is a bypass path.
Changing filter brand can require adaptors.
Standardise the size across the estate.
Record what each housing takes.
What else belongs in the specification?
Pressure gauge connections across the filter.
That is how change points are decided.
Drainage where condensation is possible.
Material suited to the airstream.
Access panel fastenings that survive repeated use.
Lighting inside is a genuine convenience.