Showing 0 products
Frequently Asked Questions
What does the cylindrical form give?
Bed depth and area in a compact envelope.
Contact time far exceeds a panel.
The tube is mechanically rigid.
The bed cannot settle or channel.
Capacity scales by adding cylinders.
Banks build serious gas-phase capability.
How does it compare with a refillable bed?
Media cost against handling effort.
Cylinders arrive sealed and change cleanly.
Labour is a fraction of emptying trays.
Occupied buildings value that highly.
Adsorbent costs more per unit of capacity.
Choose from labour and disruption, not price alone.
Are refillable cylinders available?
Yes, and they are worth asking about.
They recover part of the media cost difference.
Mechanical rigidity is retained.
Refilling is cleaner than tray work.
It suits installations changing frequently.
Confirm the refill procedure before committing.
Where do installations usually fail?
At the tube sheet seal.
Every cylinder seals individually against its aperture.
One poorly seated unit bypasses the whole bank.
Gaskets and clamping decide it.
Sheet condition matters as much.
Check every position after a change.
What about empty positions?
They must be blanked without exception.
An empty aperture is an open hole.
Air takes it in preference to the media.
Blanks are supplied for the purpose.
Count filled plus blanked against total positions.
Changes are where the count slips.
How is remaining capacity assessed?
By calculation, and by media sampling.
Some designs allow a sample to be drawn.
Testing gives remaining adsorption capacity.
The inlet face saturates first.
Pressure drop does not indicate saturation.
Set the interval from loading estimates.
Does media selection differ by format?
No, it follows the target gas as always.
Plain carbon suits many organic vapours.
Impregnated grades handle specific inorganics.
Blends address mixed contaminants.
Different cylinders can hold different media.
That allows staged treatment in one bank.